Measurement basal temperature it has truly become folk remedy pregnancy planning.
Basal or rectal temperature (BT)– This is the body temperature at rest after at least 3-6 hours of sleep, the temperature is measured in the mouth, rectum or vagina. The temperature measured at this moment is practically not affected by factors external environment. Experience shows that many women perceive the doctor’s demands to measure basal temperature as a formality and basal temperature does not solve anything, but this is far from the case.
The method of measuring basal body temperature was developed in 1953 by the English professor Marshall and refers to research methods that are based on the biological effect of sex hormones, namely on the hyperthermic (increase in temperature) action of progesterone on the thermoregulation center. Measuring basal body temperature is one of the main tests functional diagnostics work of the ovaries. Based on the results of BT measurements, a graph is constructed; an analysis of basal temperature graphs is given below.
Measuring basal temperature and charting is recommended in gynecology in the following cases:
If you have been trying to get pregnant for a year without success
If you suspect yourself or your partner is infertile
If your gynecologist suspects you have hormonal disorders
In addition to the above cases, when charting basal body temperature is recommended by a gynecologist, you can measure basal body temperature if:
Do you want to increase your chances of getting pregnant?
You are experimenting with methods of planning the sex of your child
You want to observe your body and understand the processes taking place in it (this can help you communicate with specialists)
Experience shows that many women perceive the doctor’s demands to measure basal temperature as a formality and it does not solve anything.
In fact, by measuring your basal body temperature, you and your doctor can find out:
Does the egg mature and when does this happen (accordingly, highlight “dangerous” days for the purpose of protection or, conversely, the possibility of getting pregnant);
Did ovulation occur after the egg matured?
Determine the quality of your work endocrine system
Suspect problems gynecological nature, for example, endometritis
When to expect your next menstruation
Whether pregnancy occurred due to delay or unusual menstruation;
Assess how correctly the ovaries secrete hormones in phases menstrual cycle;
A graph of basal temperature, drawn up according to all measurement rules, can show not only the presence of ovulation in a cycle or its absence, but also indicate diseases of the reproductive and endocrine systems. You must measure your basal temperature for at least 3 cycles so that the information accumulated during this time allows you to make accurate predictions about the expected date of ovulation and the most favorable time of conception, as well as conclusions about hormonal disorders. Only a gynecologist can give an accurate assessment of your basal temperature chart. Drawing up a basal temperature chart can help a gynecologist determine deviations in the cycle and suggest the absence of ovulation, but at the same time, the gynecologist makes a diagnosis only and exclusively by looking at the basal temperature chart without additional tests and examinations most often indicate medical unprofessionalism.
It is necessary to measure the basal temperature, and not the body temperature at the armpit. General increase in temperature as a result of illness, overheating, physical activity, eating, stress, naturally affects basal temperature indicators and makes them unreliable.
You will need a regular medical thermometer: mercury or electronic. Using a mercury thermometer, measure your basal temperature for five minutes. electronic thermometer it must be removed after the signal about the end of the measurement. After it squeaks, the temperature will continue to rise for some time, since the thermometer records the moment when the temperature rises above very slowly (and don’t listen to the nonsense about the thermometer not being in good contact with the muscles of the anus). The thermometer must be prepared in advance, in the evening, by placing it next to the bed. Do not place mercury thermometers under your pillow!
You should measure your basal temperature every day if possible, including on your period.
Measurements can be taken in the mouth, vagina or rectum. The main thing is that the measurement location does not change throughout the entire cycle. Measuring armpit temperature does not provide accurate results. With the oral method of measuring basal temperature, you place the thermometer under your tongue and measure for 5 minutes with your mouth closed.
When using the vaginal or rectal method of measurement, insert the narrow part of the thermometer into the anus or vagina, the measurement duration is 3 minutes. Measuring temperature in the rectum is the most common.
Measure your basal temperature in the morning, immediately after waking up and before getting out of bed.
It is necessary to measure basal temperature at the same time (a difference of half an hour to an hour (maximum one and a half hours) is acceptable). If you decide to sleep longer on the weekend, make a note about it in your schedule. Keep in mind that every extra hour of sleep raises your basal temperature by about 0.1 degrees.
Continuous sleep before measuring basal temperature in the morning should last at least three hours. Therefore, if you take your temperature at 8 am, but got up at 7 am to go, for example, to the toilet, it is better to measure your BBT before that, otherwise, at your usual 8 o’clock it will no longer be informative.
You can use either a digital or a mercury thermometer to measure. It is important not to change the thermometer during one cycle.
If you use mercury thermometer, then shake it off before going to sleep. The effort you use to shake off the thermometer immediately before measuring your basal temperature can affect your temperature.
Basal temperature is measured while lying still. Do not make unnecessary movements, do not turn, activity should be minimal. Do not under any circumstances get up to take a thermometer! Therefore, it is better to prepare it in the evening and place it near the bed so that you can reach the thermometer with your hand. Some experts advise taking the measurement without even opening your eyes, since daylight can increase the release of certain hormones.
Readings from the thermometer are taken immediately after it is removed.
It is best to immediately record your basal temperature after measurement. Otherwise you will forget or get confused. The basal temperature is approximately the same every day, differing by tenths of degrees. Relying on your memory, you can get confused in the readings. If the thermometer readings are between two numbers, record the lower reading.
The graph must indicate the reasons that could lead to an increase in basal temperature (ARI, inflammatory diseases etc.).
Business trips, travel and flights, sexual intercourse the night before or in the morning can significantly affect your basal temperature.
For diseases accompanied elevated temperature body, your basal temperature will be uninformative and you can stop taking measurements for the duration of your illness.
Basal temperature can be affected by various medicines
Like sleeping pills, sedatives and hormonal drugs.
Measuring basal temperature and simultaneous use of oral (hormonal) contraceptives does not make any sense. Basal temperature depends on the concentration of hormones in the tablets.
After drinking a large amount of alcohol, the basal temperature will be uninformative.
When working at night, basal temperature is measured during the day after at least 3-4 hours of sleep.
Day of the month
Cycle day
BT
Notes: Heavy or moderate discharge, abnormalities that can affect BT: general illness, including fever, diarrhea, intercourse in the evening (and even more so in the morning), drinking alcohol the day before, measuring BT at unusual times, going to bed late (for example, she went to bed at 3 o’clock and measured it at 6), taking sleeping pills, stress, etc.
All factors that could in one way or another affect the change in basal temperature are entered in the “Notes” column.
This form of recording greatly helps both the woman and her doctor to understand the possible causes of infertility, cycle disorders, etc.
Basal body temperature changes during the cycle under the influence of hormones.
During the maturation of the egg against the background of a high level of estrogen (the first phase of the menstrual cycle, hypothermic, “low”), the basal temperature is low; on the eve of ovulation it drops to its minimum, and then rises again, reaching a maximum. At this hour, ovulation occurs. After ovulation, a phase of high temperature begins (the second phase of the menstrual cycle, hyperthermic, “high”), which is caused by low levels of estrogen and high levels of progesterone. Pregnancy under the influence of progesterone also occurs entirely in a high temperature phase. The difference between the “low” (hypothermic) and “high” (hyperthermic) phases is 0.4-0.8 °C. Only with an accurate measurement of basal body temperature can one record the level of “low” temperature in the first half of the menstrual cycle, the transition from “low” to “high” on the day of ovulation, and the level of temperature in the second phase of the cycle.
Usually during menstruation the temperature remains at 37°C. During the period of follicle maturation (the first phase of the cycle), the temperature does not exceed 37°C. Just before ovulation it decreases (the result of the action of estrogen), and after it the basal temperature rises to 37.1 ° C and higher (the influence of progesterone). Until the next menstruation, the basal temperature remains elevated and decreases slightly by the first day of menstruation. If the basal temperature in the first phase, relative to the second, is high, then this may indicate a low amount of estrogen in the body and requires correction with medications containing female sex hormones. On the contrary, if in the second phase, relative to the first, a low basal temperature is observed, then this is an indicator of low progesterone levels and drugs are also prescribed to correct hormonal levels. This should be done only after passing the appropriate hormone tests and a doctor’s prescription.
A persistent two-phase cycle indicates ovulation, which has taken place, and the presence of a functionally active corpus luteum (the correct rhythm of the ovaries).
The absence of a rise in temperature in the second phase of the cycle (monotonic curve) or significant temperature swings, both in the first and second half of the cycle with the absence of a stable rise, indicates inoculation (lack of release of the egg from the ovaries).
Delayed rise and its short duration (hypothermic phase for 2-7, up to 10 days) is observed with a shortening of the luteal phase, insufficient rise (0.2-0.3 ° C) - with insufficient functioning of the corpus luteum.
The thermogenic effect of progesterone leads to an increase in body temperature by at least 0.33 ° C (the effect lasts until the end of the luteal, that is, the second, phase of the menstrual cycle). Progesterone levels peak 8-9 days after ovulation, which roughly corresponds to the time the fertilized egg implants into the uterine wall.
By charting your basal temperature, you can not only determine when you ovulate, but also find out what processes are occurring in your body.
If the basal temperature chart is constructed correctly, taking into account the measurement rules, it can reveal not only the presence or absence of ovulation, but also some diseases.
The line is drawn over 6 temperature values in the first phase of the cycle preceding ovulation.
This does not take into account the first 5 days of the cycle, as well as days on which the temperature could be affected by various negative factors (see rules for measuring temperature). This line does not allow any conclusions to be drawn from the graph and is for illustrative purposes only.
In order to judge the onset of ovulation, the rules established by the World Health Organization (WHO) are used:
Three temperature values in a row must be above the level of the line drawn over the previous 6 temperature values.
The difference between the center line and the three temperature values must be at least 0.1 degrees on two days out of three and at least 0.2 degrees on one of those days.
If your temperature curve meets these requirements, then an ovulation line will appear on your basal temperature chart 1-2 days after ovulation.
Sometimes it is not possible to determine ovulation using the WHO method due to the fact that there are high temperatures in the first phase of the cycle. In this case, you can apply the “finger rule” to the basal temperature chart. This rule excludes temperature values that differ from the previous or subsequent temperature by more than 0.2 degrees. Such temperature values should not be taken into account when calculating ovulation if the overall basal temperature chart is normal.
The most optimal time for conception is the day of ovulation and 2 days before it.
The total length of the cycle should normally not be shorter than 21 days and should not exceed 35 days. If your cycles are shorter or longer, then you may have ovarian dysfunction, which is often the cause of infertility and requires treatment by a gynecologist.
The basal temperature chart is divided into the first and second phases. The division takes place where the ovulation line (vertical) is marked. Accordingly, the first phase of the cycle is the segment of the graph before ovulation, and the second phase of the cycle is after ovulation.
The length of the second phase of the cycle is normally from 12 to 16 days, most often 14 days. In contrast, the length of the first phase can vary greatly and these variations are the individual norm. At the same time, in a healthy woman in different cycles there should be no significant differences in the length of the first phase and the second phase. The total length of the cycle normally changes only due to the length of the first phase.
One of the problems identified on the graphs and confirmed by subsequent hormonal studies is the failure of the second phase. If you measure your basal temperature over several cycles, following all the measurement rules, and your second phase is shorter than 10 days, this is a reason to consult a gynecologist. Also, if you regularly have sexual intercourse during ovulation, pregnancy does not occur and the length of the second phase is at the lower limit (10 or 11 days), then this may indicate insufficiency of the second phase.
Normally, the difference in average temperatures of the first and second phases should be more than 0.4 degrees. If it is lower, this may indicate hormonal problems. Get a blood test for progesterone and estrogen and consult a gynecologist.
An increase in basal temperature occurs when serum progesterone levels exceed 2.5-4.0 ng/ml (7.6-12.7 nmol/l). However, monophasic basal temperature has been identified in a number of patients with normal progesterone levels in the second phase of the cycle. In addition, monophasic basal temperature is observed in approximately 20% of ovulatory cycles. A simple statement of biphasic basal temperature does not prove the normal function of the corpus luteum. Basal temperature also cannot be used to determine the time of ovulation, since even during luteinization of an unovulated follicle, a two-phase basal temperature is observed. Nevertheless, the duration of the luteal phase in accordance with basal temperature data and the low rate of rise in basal temperature after ovulation are accepted by many authors as criteria for diagnosing luteinization syndrome of a non-ovulating follicle.
Classic gynecological manuals describe five main types of temperature curves.
Such graphs indicate an increase in temperature in the second phase of the cycle by at least 0.4 C; a noticeable “preovulatory” and “premenstrual” drop in temperature. The duration of the temperature increase after ovulation is 12-14 days. This curve is typical for a normal two-phase menstrual cycle.
The example graph shows a pre-ovulatory drop on the 12th day of the cycle (the temperature drops significantly two days before ovulation), as well as a premenstrual drop starting from the 26th day of the cycle.
There is a slight rise in temperature in the second phase. The temperature difference in the first and second phases is no more than 0.2-0.3 C. Such a curve may indicate estrogen-progesterone deficiency. See examples of graphs below.
If such graphs are repeated from cycle to cycle, then this may indicate hormonal imbalances that cause infertility.
Basal temperature begins to rise only shortly before menstruation, and there is no “premenstrual” drop in temperature. The second phase of the cycle can last less than 10 days. This curve is typical for a two-phase menstrual cycle with insufficiency of the second phase. See examples of graphs below.
Pregnancy in such a cycle is possible, but it is under threat from the very beginning. At this moment, the woman still cannot know about the pregnancy; even gynecologists would find it difficult to make a diagnosis at such an early stage. With such a schedule, we may not be talking about infertility, but about miscarriage. Be sure to contact your gynecologist if this schedule repeats for you for 3 cycles.
In a cycle without ovulation, the corpus luteum, which produces the hormone progesterone and affects the increase in basal body temperature, does not form. In this case, the basal temperature chart does not show a rise in temperature and ovulation is not detected. If there is no ovulation line on the graph, then we are talking about an anovulatory cycle.
Each woman may have several anovulatory cycles per year - this is normal and does not require medical intervention, but if this situation repeats from cycle to cycle, then be sure to consult a gynecologist. Without ovulation, pregnancy is impossible!
A monotonous curve occurs when there is no pronounced rise throughout the entire cycle. This schedule is observed during an anovulatory (no ovulation) cycle. See examples of graphs below.
On average, a woman has one anovulatory cycle per year and there is no reason to worry in this case. But anovulatory patterns that are repeated from cycle to cycle are a very serious reason to consult a gynecologist. Without ovulation, a woman cannot become pregnant and we are talking about female infertility.
Chaotic temperature curve. The graph shows large temperature ranges; it does not fit into any of the types described above. This type of curve can be observed both with severe estrogen deficiency and depend on random factors. Examples of graphs are below.
A competent gynecologist will definitely require tests for hormones and conduct an ultrasound examination before prescribing medicines
.The basal temperature chart is divided into the first and second phases. The division takes place where the ovulation line (vertical line) is marked. Accordingly, the first phase of the cycle is the segment of the graph before ovulation, and the second phase of the cycle is after ovulation.
In the first phase of the cycle, the hormone estrogen dominates in the female body. Under the influence of this hormone, the basal temperature before ovulation averages between 36.2 and 36.5 degrees. If the temperature in the first phase rises and remains above this level, then estrogen deficiency can be assumed. In this case, the average temperature of the first phase rises to 36.5 - 36.8 degrees and is maintained at this level. To increase estrogen levels, gynecologists-endocrinologists will prescribe hormonal medications.
Estrogen deficiency also leads to elevated temperature in the second phase of the cycle (above 37.1 degrees), while the rise in temperature is slower and takes more than 3 days.
Using the example graph, the temperature in the first phase is above 37.0 degrees, in the second phase it rises to 37.5, the rise in temperature by 0.2 degrees on days 17 and 18 of the cycle is insignificant. Fertilization in a cycle with such a schedule is very problematic.
Another reason for the increase in temperature in the first phase may be inflammation of the appendages. In this case, the temperature rises only for a few days in the first phase to 37 degrees, and then drops again. In such graphs, calculating ovulation is difficult, since such a rise “masks” the ovulatory rise.
In the example graph, the temperature in the first phase of the cycle is kept at 37.0 degrees, the increase occurs sharply and also decreases sharply. A rise in temperature on the 6th day of the cycle can be mistaken for an ovulatory rise, but in fact it most likely indicates inflammation. That's why it's so important to measure your temperature throughout your cycle to rule out a scenario where your temperature rises due to inflammation, then drops again, and then rises due to ovulation.
Normally, the temperature in the first phase should decrease during menstrual bleeding. If your temperature at the end of the cycle drops before the start of menstruation and rises again to 37.0 degrees with the beginning of menstruation (less often on the 2-3rd day of the cycle), then this may indicate the presence of endometritis.
Characteristically, the temperature drops before menstruation and rises with the beginning of the next cycle. If there is no drop in temperature before the start of menstruation in the first cycle, i.e. the temperature remains at this level, then pregnancy can be assumed, despite the bleeding that has begun. Take a pregnancy test and contact a gynecologist who will perform an ultrasound to make an accurate diagnosis.
If the basal temperature in the first phase rises sharply for one day, then this does not mean anything. Inflammation of the appendages cannot begin and end in one day. Also, a lack of estrogen can only be assumed by assessing the entire graph, and not a separate temperature in the first phase. For diseases accompanied by high or elevated body temperature, measuring basal temperature, much less judging its nature and analyzing the graph, makes no sense.
In the second phase of the cycle, the basal temperature should differ significantly (by about 0.4 degrees) from the first phase and be at 37.0 degrees or higher if you measure the temperature rectally. If the temperature difference is less than 0.4 degrees and the average temperature of the second phase does not reach 36.8 degrees, then this may indicate problems.
In the second phase of the cycle, the female body begins to produce the hormone progesterone or the hormone of the corpus luteum. This hormone is responsible for raising the temperature in the second phase of the cycle and preventing the onset of menstruation. If this hormone is not enough, the temperature rises slowly and the resulting pregnancy may be in jeopardy.
The temperature with corpus luteum deficiency rises shortly before menstruation, and there is no “premenstrual” drop. This may indicate hormonal deficiency. The diagnosis is made based on a blood test for progesterone in the second phase of the cycle. If its values are reduced, then the gynecologist usually prescribes a progesterone substitute: utrozhestan or duphaston. These drugs are taken strictly after ovulation. If pregnancy occurs, use continues until 10-12 weeks. Abrupt withdrawal of progesterone in the second phase during pregnancy can lead to the threat of termination of pregnancy.
Particular attention should be paid to charts with a short second phase. If the second phase is shorter than 10 days, then one can also judge that the second phase is insufficient.
Situations when the basal temperature remains elevated for more than 14 days occur during pregnancy, the formation of an ovarian corpus luteum cyst, as well as during an acute inflammatory process of the pelvic organs.
If, in combination with low temperature in the second phase, your chart shows a slight rise in temperature (0.2-0.3 C) after ovulation, then such a curve may indicate not only a lack of progesterone, but also a lack of the hormone estrogen.
Due to an increase in the level of the pituitary hormone, prolactin, which is responsible for maintaining pregnancy and lactation, the basal temperature graph in this case may resemble the graph of a pregnant woman. Menstruation, just like during pregnancy, may be absent. An example of a basal temperature chart for hyperprolactinemia
When ovulation is stimulated, in particular by clomiphene (clostilbegit) with the use of duphaston in the second phase of the MC, the basal temperature graph, as a rule, becomes “normal” - two-phase, with a pronounced phase transition, with a fairly high temperature in the second phase, with characteristic “steps” (temperature rises 2 times) and slight depression. If the temperature graph during stimulation, on the contrary, is disrupted and deviates from normal, this may indicate an incorrect selection of the dose of drugs or an inappropriate stimulation scenario (other medications may be needed). An increase in temperature in the first phase upon stimulation with clomiphene also occurs with individual sensitivity to the drug.
Low or high temperature in both phases, provided that the temperature difference is at least 0.4 degrees, is not a pathology. This is an individual feature of the body. The measurement method can also affect the temperature values. Typically, with an oral measurement, the basal temperature is 0.2 degrees lower than with a rectal or vaginal measurement.
If you strictly follow the rules for measuring temperature and observe the problems described on your basal temperature chart in at least 2 cycles in a row, consult a doctor for additional examinations. Beware of your gynecologist making diagnoses based solely on charts. What you need to pay attention to:
anovulatory schedules
regular cycle delays when pregnancy does not occur
late ovulation and failure to become pregnant for several cycles
controversial charts with unclear ovulation
graphs with high temperature throughout the cycle
graphs with low temperature throughout the cycle
schedules with a short (less than 10 days) second phase
graphs with a high temperature in the second phase of the cycle for more than 18 days, without the onset of menstruation and a negative pregnancy test
unexplained bleeding or heavy discharge mid-cycle
heavy menstruation lasting more than 5 days
graphs with a temperature difference in the first and second phases of less than 0.4 degrees
cycles shorter than 21 days or longer than 35 days
charts with clearly defined ovulation, regular intercourse during ovulation and no pregnancy occurring for several cycles
The average value of the second phase of the cycle (after the temperature rise) exceeds the average value of the first phase by less than 0.4°C.
In the second phase of the cycle, there are temperature drops (the temperature drops below 37°C).
The rise in temperature in the middle of the cycle continues for more than 3 to 4 days.
The second phase is short (less than 8 days).
The method of determining pregnancy by basal temperature works provided there is ovulation in the cycle, since with some health problems the basal temperature can be elevated for an arbitrarily long time, and menstruation may be absent. A striking example of such a disorder is hyperprolactinemia, caused by increased production of the hormone prolactin by the pituitary gland. Prolactin is responsible for maintaining pregnancy and lactation and is normally elevated only during pregnancy and lactation (see Examples of graphs for normal conditions and various disorders).
Fluctuations in basal temperature in different phases of the menstrual cycle are due to different levels of hormones responsible for phases 1 and 2.
During menstruation, basal temperature is always elevated (about 37.0 and above). In the first phase of the cycle (follicular) before ovulation, the basal temperature is low, up to 37.0 degrees.
Before ovulation, the basal temperature decreases, and immediately after ovulation it increases by 0.4 - 0.5 degrees and remains elevated until the next menstruation.
In women with different lengths of the menstrual cycle, the duration of the follicular phase is different, and the length of the luteal (second) phase of the cycle is approximately the same and does not exceed 12-14 days. Thus, if the basal temperature after the jump (which indicates ovulation) remains elevated for more than 14 days, this clearly indicates pregnancy.
This method of determining pregnancy works provided there is ovulation in the cycle, since with some health problems the basal temperature can be elevated for an arbitrarily long time, and menstruation may be absent. A striking example of such a disorder is hyperprolactinemia, caused by increased production of the hormone prolactin by the pituitary gland. Prolactin is responsible for maintaining pregnancy and lactation and is normally elevated only during pregnancy and lactation.
If a woman is pregnant, then menstruation will not occur and the temperature will remain elevated throughout pregnancy. A decrease in basal temperature during pregnancy may indicate a lack of hormones that maintain pregnancy and the threat of its termination.
When pregnancy occurs, in most cases, implantation occurs 7-10 days after ovulation - the introduction of a fertilized egg into the endometrium (the inner lining of the uterus). In rare cases, early (before 7 days) or late (after 10 days) implantation is observed. Unfortunately, it is impossible to reliably determine the presence or absence of implantation either on the basis of a chart or with the help of ultrasound at an appointment with a gynecologist. However, there are several signs that may indicate implantation has taken place. All these signs can be detected 7-10 days after ovulation:
It is possible that small discharge appears these days, which disappears within 1-2 days. This may be so-called implantation bleeding. When the egg implants into the inner lining of the uterus, the endometrium is damaged, which leads to minor discharge. But if you experience regular discharge in the middle of the cycle, and pregnancy does not occur, then you should contact a gynecology center.
A sharp decrease in temperature to the midline level for one day in the second phase, the so-called implantation retraction. This is one of the signs most often observed in charts with confirmed pregnancy. This retraction can occur for two reasons. Firstly, the production of the hormone progesterone, which is responsible for raising the temperature, begins to decrease from the middle of the second phase; with pregnancy, its production resumes again, which leads to temperature fluctuations. Secondly, during pregnancy, the hormone estrogen is released, which in turn lowers the temperature. The combination of these two hormonal shifts leads to the appearance of implantation retraction on the graph.
Your chart has become three-phase, which means that you see a rise in temperature on the chart, similar to ovulation, during the second phase of the cycle. This rise is again due to the increased production of the hormone progesterone after implantation.
The example graph shows implantation retraction on the 21st day of the cycle and the presence of the third phase, starting from the 26th day of the cycle.
Early signs of pregnancy such as nausea, tightness in the chest, frequent urination, intestinal upset or just the feeling of pregnancy also do not provide an accurate answer. You may not be pregnant if you have all of these signs, or you may be pregnant without any symptoms.
All these signs can be a confirmation of pregnancy, but you should not rely on them, since there are many examples in which the signs were present, but pregnancy did not occur. Or, conversely, when pregnancy occurred there were no signs. The most reliable conclusions can be drawn if there is a clear rise in temperature on your chart, you had sexual intercourse 1-2 days before or during ovulation, and your temperature remains high 14 days after ovulation. In this case, the time has come to take a pregnancy test, which will finally confirm your expectations.
Measuring basal temperature is one of the main methods of tracking fertility, recognized by the World Health Organization (WHO). You can read more about this in the WHO document “Medical eligibility criteria for the use of contraceptive methods” page 117.
When you use the basal temperature method to protect against unwanted pregnancy, you need to take into account that not only the days of ovulation according to the basal temperature schedule can be dangerous. Therefore, during the period from the beginning of menstruation until the evening of the 3rd day after the rise in basal temperature, which occurs after ovulation, it is better to use additional measures to prevent unwanted pregnancy.
Our regular reader, Natalya Gorshkova, has compiled a form for you to quickly fill out and automatically plot your basal temperature chart, which you can print out and show to your doctor. You can download it from the link: .
Graphs are discussed at
Attention! Making any diagnoses based solely on basal temperature charts is impossible. Diagnoses are made based on additional examinations performed by a gynecologist.The basal temperature chart, the template of which can be downloaded on our website, helps girls in identifying the most favorable moment for conception. Let's consider the principles of filling it out and the rules for taking measurements.
Basal temperature is the lowest body temperature reached at rest. It is measured in three ways: in the oral cavity, in the vagina or rectum. It is believed that rectal measurement is more relevant.
For the readings to be true, you need to measure the temperature with one thermometer and one method. That is, having started taking measurements in the rectum, there is no need to switch to another option.
You need to keep a chart of your basal temperature on a form, guided by the following principles:
You need to start taking measurements 3-4 months before the planned conception in order to understand your normal indicators, because they may differ from the standard. Each cycle must be reflected on a separate form. This makes it easy to compare them with each other.
Our template will be convenient for every girl, even with the longest cycle, because it is designed for 45 days with a maximum cycle of 35 days. It also includes a wide temperature range of 35.9-38.1°C, which will allow you to track any atypical condition.
There are standards for each stage of the cycle that you need to focus on:
After printing out the basal temperature chart (template) and making observations, you need to put notes below under the corresponding dates with the reasons that may affect the change in temperature: drinking alcohol, colds, stress, sexual intercourse, etc. This will explain the atypical indicator and will not cause concern.
Measuring basal temperature has become a truly popular means of pregnancy planning.
Basal or rectal temperature (BT)– This is the body temperature at rest after at least 3-6 hours of sleep, the temperature is measured in the mouth, rectum or vagina. The temperature measured at this moment is practically not affected by environmental factors. Experience shows that many women perceive the doctor’s demands to measure basal temperature as a formality and basal temperature does not solve anything, but this is far from the case.
The method of measuring basal body temperature was developed in 1953 by the English professor Marshall and refers to research methods that are based on the biological effect of sex hormones, namely on the hyperthermic (increase in temperature) action of progesterone on the thermoregulation center. Measuring basal body temperature is one of the main tests for the functional diagnosis of ovarian function. Based on the results of BT measurements, a graph is constructed; an analysis of basal temperature graphs is given below.
Measuring basal temperature and charting is recommended in gynecology in the following cases:
If you have been trying to get pregnant for a year without success
If you suspect yourself or your partner is infertile
If your gynecologist suspects you have hormonal disorders
In addition to the above cases, when charting basal body temperature is recommended by a gynecologist, you can measure basal body temperature if:
Do you want to increase your chances of getting pregnant?
You are experimenting with methods of planning the sex of your child
You want to observe your body and understand the processes taking place in it (this can help you communicate with specialists)
Experience shows that many women perceive the doctor’s demands to measure basal temperature as a formality and it does not solve anything.
In fact, by measuring your basal body temperature, you and your doctor can find out:
Does the egg mature and when does this happen (accordingly, highlight “dangerous” days for the purpose of protection or, conversely, the possibility of getting pregnant);
Did ovulation occur after the egg matured?
Determine the quality of your endocrine system
Suspect gynecological problems, such as endometritis
When to expect your next menstruation
Whether pregnancy occurred due to delay or unusual menstruation;
Assess how correctly the ovaries secrete hormones according to the phases of the menstrual cycle;
A graph of basal temperature, drawn up according to all measurement rules, can show not only the presence of ovulation in a cycle or its absence, but also indicate diseases of the reproductive and endocrine systems. You must measure your basal temperature for at least 3 cycles so that the information accumulated during this time allows you to make accurate predictions about the expected date of ovulation and the most favorable time of conception, as well as conclusions about hormonal disorders. Only a gynecologist can give an accurate assessment of your basal temperature chart. Drawing up a basal temperature chart can help a gynecologist determine deviations in the cycle and suggest the absence of ovulation, but at the same time, a gynecologist’s diagnosis based solely on the basal temperature chart without additional tests and examinations most often indicates medical unprofessionalism.
It is necessary to measure the basal temperature, and not the body temperature at the armpit. A general increase in temperature as a result of illness, overheating, physical activity, eating, stress, naturally affects the basal temperature readings and makes them unreliable.
You will need a regular medical thermometer: mercury or electronic. The basal temperature is measured with a mercury thermometer for five minutes, but the electronic thermometer must be removed after the signal about the end of the measurement. After it squeaks, the temperature will continue to rise for some time, since the thermometer records the moment when the temperature rises above very slowly (and don’t listen to the nonsense about the thermometer not being in good contact with the muscles of the anus). The thermometer must be prepared in advance, in the evening, by placing it next to the bed. Do not place mercury thermometers under your pillow!
You should measure your basal temperature every day if possible, including on your period.
Measurements can be taken in the mouth, vagina or rectum. The main thing is that the measurement location does not change throughout the entire cycle. Measuring armpit temperature does not provide accurate results. With the oral method of measuring basal temperature, you place the thermometer under your tongue and measure for 5 minutes with your mouth closed.
When using the vaginal or rectal method of measurement, insert the narrow part of the thermometer into the anus or vagina, the measurement duration is 3 minutes. Measuring temperature in the rectum is the most common.
Measure your basal temperature in the morning, immediately after waking up and before getting out of bed.
It is necessary to measure basal temperature at the same time (a difference of half an hour to an hour (maximum one and a half hours) is acceptable). If you decide to sleep longer on the weekend, make a note about it in your schedule. Keep in mind that every extra hour of sleep raises your basal temperature by about 0.1 degrees.
Continuous sleep before measuring basal temperature in the morning should last at least three hours. Therefore, if you take your temperature at 8 am, but got up at 7 am to go, for example, to the toilet, it is better to measure your BBT before that, otherwise, at your usual 8 o’clock it will no longer be informative.
You can use either a digital or a mercury thermometer to measure. It is important not to change the thermometer during one cycle.
If you use a mercury thermometer, shake it off before going to sleep. The effort you use to shake off the thermometer immediately before measuring your basal temperature can affect your temperature.
Basal temperature is measured while lying still. Do not make unnecessary movements, do not turn, activity should be minimal. Do not under any circumstances get up to take a thermometer! Therefore, it is better to prepare it in the evening and place it near the bed so that you can reach the thermometer with your hand. Some experts advise taking the measurement without even opening your eyes, since daylight can increase the release of certain hormones.
Readings from the thermometer are taken immediately after it is removed.
It is best to immediately record your basal temperature after measurement. Otherwise you will forget or get confused. The basal temperature is approximately the same every day, differing by tenths of degrees. Relying on your memory, you can get confused in the readings. If the thermometer readings are between two numbers, record the lower reading.
The schedule must indicate the reasons that could lead to an increase in basal temperature (acute respiratory infections, inflammatory diseases, etc.).
Business trips, travel and flights, sexual intercourse the night before or in the morning can significantly affect your basal temperature.
In case of illnesses accompanied by elevated body temperature, your basal temperature will be uninformative and you can stop taking measurements for the duration of your illness.
Various medications, such as sleeping pills, sedatives and hormonal drugs, can affect basal temperature.
Measuring basal temperature and simultaneous use of oral (hormonal) contraceptives does not make any sense. Basal temperature depends on the concentration of hormones in the tablets.
After drinking a large amount of alcohol, the basal temperature will be uninformative.
When working at night, basal temperature is measured during the day after at least 3-4 hours of sleep.
Day of the month
Cycle day
BT
Notes: Heavy or moderate discharge, abnormalities that can affect BT: general illness, including fever, diarrhea, intercourse in the evening (and even more so in the morning), drinking alcohol the day before, measuring BT at unusual times, going to bed late (for example, she went to bed at 3 o’clock and measured it at 6), taking sleeping pills, stress, etc.
All factors that in one way or another could affect the change in basal temperature are entered in the “Notes” column.
This form of recording greatly helps both the woman and her doctor to understand the possible causes of infertility, cycle disorders, etc.
Basal body temperature changes during the cycle under the influence of hormones.
During the maturation of the egg against the background of a high level of estrogen (the first phase of the menstrual cycle, hypothermic, “low”), the basal temperature is low; on the eve of ovulation it drops to its minimum, and then rises again, reaching a maximum. At this hour, ovulation occurs. After ovulation, a phase of high temperature begins (the second phase of the menstrual cycle, hyperthermic, “high”), which is caused by low levels of estrogen and high levels of progesterone. Pregnancy under the influence of progesterone also occurs entirely in a high temperature phase. The difference between the “low” (hypothermic) and “high” (hyperthermic) phases is 0.4-0.8 °C. Only with an accurate measurement of basal body temperature can one record the level of “low” temperature in the first half of the menstrual cycle, the transition from “low” to “high” on the day of ovulation, and the level of temperature in the second phase of the cycle.
Usually during menstruation the temperature remains at 37°C. During the period of follicle maturation (the first phase of the cycle), the temperature does not exceed 37°C. Just before ovulation it decreases (the result of the action of estrogen), and after it the basal temperature rises to 37.1 ° C and higher (the influence of progesterone). Until the next menstruation, the basal temperature remains elevated and decreases slightly by the first day of menstruation. If the basal temperature in the first phase, relative to the second, is high, then this may indicate a low amount of estrogen in the body and requires correction with medications containing female sex hormones. On the contrary, if in the second phase, relative to the first, a low basal temperature is observed, then this is an indicator of low progesterone levels and drugs are also prescribed to correct hormonal levels. This should be done only after passing the appropriate hormone tests and a doctor’s prescription.
A persistent two-phase cycle indicates ovulation, which has taken place, and the presence of a functionally active corpus luteum (the correct rhythm of the ovaries).
The absence of a rise in temperature in the second phase of the cycle (monotonic curve) or significant temperature swings, both in the first and second half of the cycle with the absence of a stable rise, indicates inoculation (lack of release of the egg from the ovaries).
Delayed rise and its short duration (hypothermic phase for 2-7, up to 10 days) is observed with a shortening of the luteal phase, insufficient rise (0.2-0.3 ° C) - with insufficient functioning of the corpus luteum.
The thermogenic effect of progesterone leads to an increase in body temperature by at least 0.33 ° C (the effect lasts until the end of the luteal, that is, the second, phase of the menstrual cycle). Progesterone levels peak 8-9 days after ovulation, which roughly corresponds to the time the fertilized egg implants into the uterine wall.
By charting your basal temperature, you can not only determine when you ovulate, but also find out what processes are occurring in your body.
If the basal temperature chart is constructed correctly, taking into account the measurement rules, it can reveal not only the presence or absence of ovulation, but also some diseases.
The line is drawn over 6 temperature values in the first phase of the cycle preceding ovulation.
This does not take into account the first 5 days of the cycle, as well as days on which the temperature could be affected by various negative factors (see rules for measuring temperature). This line does not allow any conclusions to be drawn from the graph and is for illustrative purposes only.
In order to judge the onset of ovulation, the rules established by the World Health Organization (WHO) are used:
Three temperature values in a row must be above the level of the line drawn over the previous 6 temperature values.
The difference between the center line and the three temperature values must be at least 0.1 degrees on two days out of three and at least 0.2 degrees on one of those days.
If your temperature curve meets these requirements, then an ovulation line will appear on your basal temperature chart 1-2 days after ovulation.
Sometimes it is not possible to determine ovulation using the WHO method due to the fact that there are high temperatures in the first phase of the cycle. In this case, you can apply the “finger rule” to the basal temperature chart. This rule excludes temperature values that differ from the previous or subsequent temperature by more than 0.2 degrees. Such temperature values should not be taken into account when calculating ovulation if, in general, The basal temperature chart is normal.
The most optimal time for conception is the day of ovulation and 2 days before it.
The total length of the cycle should normally not be shorter than 21 days and should not exceed 35 days. If your cycles are shorter or longer, then you may have ovarian dysfunction, which is often the cause of infertility and requires treatment by a gynecologist.
The basal temperature chart is divided into the first and second phases. The division takes place where the ovulation line (vertical) is marked. Accordingly, the first phase of the cycle is the segment of the graph before ovulation, and the second phase of the cycle is after ovulation.
The length of the second phase of the cycle is normally from 12 to 16 days, most often 14 days. In contrast, the length of the first phase can vary greatly and these variations are the individual norm. At the same time, in a healthy woman in different cycles there should be no significant differences in the length of the first phase and the second phase. The total length of the cycle normally changes only due to the length of the first phase.
One of the problems identified on the graphs and confirmed by subsequent hormonal studies is the failure of the second phase. If you measure your basal temperature over several cycles, following all the measurement rules, and your second phase is shorter than 10 days, this is a reason to consult a gynecologist. Also, if you regularly have sexual intercourse during ovulation, pregnancy does not occur and the length of the second phase is at the lower limit (10 or 11 days), then this may indicate insufficiency of the second phase.
Normally, the difference in average temperatures of the first and second phases should be more than 0.4 degrees. If it is lower, this may indicate hormonal problems. Get a blood test for progesterone and estrogen and consult a gynecologist.
An increase in basal temperature occurs when serum progesterone levels exceed 2.5-4.0 ng/ml (7.6-12.7 nmol/l). However, monophasic basal temperature has been identified in a number of patients with normal progesterone levels in the second phase of the cycle. In addition, monophasic basal temperature is observed in approximately 20% of ovulatory cycles. A simple statement of biphasic basal temperature does not prove the normal function of the corpus luteum. Basal temperature also cannot be used to determine the time of ovulation, since even during luteinization of an unovulated follicle, a two-phase basal temperature is observed. Nevertheless, the duration of the luteal phase in accordance with basal temperature data and the low rate of rise in basal temperature after ovulation are accepted by many authors as criteria for diagnosing luteinization syndrome of a non-ovulating follicle.
Classic gynecological manuals describe five main types of temperature curves.
Such graphs indicate an increase in temperature in the second phase of the cycle by at least 0.4 C; a noticeable “preovulatory” and “premenstrual” drop in temperature. The duration of the temperature increase after ovulation is 12-14 days. This curve is typical for a normal two-phase menstrual cycle.
The example graph shows a pre-ovulatory drop on the 12th day of the cycle (the temperature drops significantly two days before ovulation), as well as a premenstrual drop starting from the 26th day of the cycle.
There is a slight rise in temperature in the second phase. The temperature difference in the first and second phases is no more than 0.2-0.3 C. Such a curve may indicate estrogen-progesterone deficiency. See examples of graphs below.
If such graphs are repeated from cycle to cycle, then this may indicate hormonal imbalances that cause infertility.
Basal temperature begins to rise only shortly before menstruation, and there is no “premenstrual” drop in temperature. The second phase of the cycle can last less than 10 days. This curve is typical for a two-phase menstrual cycle with insufficiency of the second phase. See examples of graphs below.
Pregnancy in such a cycle is possible, but it is under threat from the very beginning. At this moment, the woman still cannot know about the pregnancy; even gynecologists would find it difficult to make a diagnosis at such an early stage. With such a schedule, we may not be talking about infertility, but about miscarriage. Be sure to contact your gynecologist if this schedule repeats for you for 3 cycles.
In a cycle without ovulation, the corpus luteum, which produces the hormone progesterone and affects the increase in basal body temperature, does not form. In this case, the basal temperature chart does not show a rise in temperature and ovulation is not detected. If there is no ovulation line on the graph, then we are talking about an anovulatory cycle.
Each woman may have several anovulatory cycles per year - this is normal and does not require medical intervention, but if this situation repeats from cycle to cycle, then be sure to consult a gynecologist. Without ovulation, pregnancy is impossible!
A monotonous curve occurs when there is no pronounced rise throughout the entire cycle. This schedule is observed during an anovulatory (no ovulation) cycle. See examples of graphs below.
On average, a woman has one anovulatory cycle per year and there is no reason to worry in this case. But anovulatory patterns that are repeated from cycle to cycle are a very serious reason to consult a gynecologist. Without ovulation, a woman cannot become pregnant and we are talking about female infertility.
Chaotic temperature curve. The graph shows large temperature ranges; it does not fit into any of the types described above. This type of curve can be observed both with severe estrogen deficiency and depend on random factors. Examples of graphs are below.
A competent gynecologist will definitely require hormone tests and conduct an ultrasound examination before prescribing medications.
The basal temperature chart is divided into the first and second phases. The division takes place where the ovulation line (vertical line) is marked. Accordingly, the first phase of the cycle is the segment of the graph before ovulation, and the second phase of the cycle is after ovulation.
In the first phase of the cycle, the hormone estrogen dominates in the female body. Under the influence of this hormone, the basal temperature before ovulation averages between 36.2 and 36.5 degrees. If the temperature in the first phase rises and remains above this level, then estrogen deficiency can be assumed. In this case, the average temperature of the first phase rises to 36.5 - 36.8 degrees and is maintained at this level. To increase estrogen levels, gynecologists-endocrinologists will prescribe hormonal medications.
Estrogen deficiency also leads to elevated temperature in the second phase of the cycle (above 37.1 degrees), while the rise in temperature is slower and takes more than 3 days.
Using the example graph, the temperature in the first phase is above 37.0 degrees, in the second phase it rises to 37.5, the rise in temperature by 0.2 degrees on days 17 and 18 of the cycle is insignificant. Fertilization in a cycle with such a schedule is very problematic.
Another reason for the increase in temperature in the first phase may be inflammation of the appendages. In this case, the temperature rises only for a few days in the first phase to 37 degrees, and then drops again. In such graphs, calculating ovulation is difficult, since such a rise “masks” the ovulatory rise.
In the example graph, the temperature in the first phase of the cycle is kept at 37.0 degrees, the increase occurs sharply and also decreases sharply. A rise in temperature on the 6th day of the cycle can be mistaken for an ovulatory rise, but in fact it most likely indicates inflammation. That's why it's so important to measure your temperature throughout your cycle to rule out a scenario where your temperature rises due to inflammation, then drops again, and then rises due to ovulation.
Normally, the temperature in the first phase should decrease during menstrual bleeding. If your temperature at the end of the cycle drops before the start of menstruation and rises again to 37.0 degrees with the beginning of menstruation (less often on the 2-3rd day of the cycle), then this may indicate the presence of endometritis.
Characteristically, the temperature drops before menstruation and rises with the beginning of the next cycle. If there is no drop in temperature before the start of menstruation in the first cycle, i.e. the temperature remains at this level, then pregnancy can be assumed, despite the bleeding that has begun. Take a pregnancy test and contact a gynecologist who will perform an ultrasound to make an accurate diagnosis.
If the basal temperature in the first phase rises sharply for one day, then this does not mean anything. Inflammation of the appendages cannot begin and end in one day. Also, a lack of estrogen can only be assumed by assessing the entire graph, and not a separate temperature in the first phase. For diseases accompanied by high or elevated body temperature, measuring basal temperature, much less judging its nature and analyzing the graph, makes no sense.
In the second phase of the cycle, the basal temperature should differ significantly (by about 0.4 degrees) from the first phase and be at 37.0 degrees or higher if you measure the temperature rectally. If the temperature difference is less than 0.4 degrees and the average temperature of the second phase does not reach 36.8 degrees, then this may indicate problems.
In the second phase of the cycle, the female body begins to produce the hormone progesterone or the hormone of the corpus luteum. This hormone is responsible for raising the temperature in the second phase of the cycle and preventing the onset of menstruation. If this hormone is not enough, the temperature rises slowly and the resulting pregnancy may be in jeopardy.
The temperature with corpus luteum deficiency rises shortly before menstruation, and there is no “premenstrual” drop. This may indicate hormonal deficiency. The diagnosis is made based on a blood test for progesterone in the second phase of the cycle. If its values are reduced, then the gynecologist usually prescribes a progesterone substitute: utrozhestan or duphaston. These drugs are taken strictly after ovulation. If pregnancy occurs, use continues until 10-12 weeks. Abrupt withdrawal of progesterone in the second phase during pregnancy can lead to the threat of termination of pregnancy.
Particular attention should be paid to charts with a short second phase. If the second phase is shorter than 10 days, then one can also judge that the second phase is insufficient.
Situations when the basal temperature remains elevated for more than 14 days occur during pregnancy, the formation of an ovarian corpus luteum cyst, as well as during an acute inflammatory process of the pelvic organs.
If, in combination with low temperature in the second phase, your chart shows a slight rise in temperature (0.2-0.3 C) after ovulation, then such a curve may indicate not only a lack of progesterone, but also a lack of the hormone estrogen.
Due to an increase in the level of the pituitary hormone, prolactin, which is responsible for maintaining pregnancy and lactation, the basal temperature graph in this case may resemble the graph of a pregnant woman. Menstruation, just like during pregnancy, may be absent. An example of a basal temperature chart for hyperprolactinemia
When ovulation is stimulated, in particular by clomiphene (clostilbegit) with the use of duphaston in the second phase of the cycle, the basal temperature graph, as a rule, becomes “normal” - two-phase, with a pronounced phase transition, with a fairly high temperature in the second phase, with characteristic “steps” (temperature rises 2 times) and slight depression. If the temperature graph during stimulation, on the contrary, is disrupted and deviates from normal, this may indicate an incorrect selection of the dose of drugs or an inappropriate stimulation scenario (other medications may be needed). An increase in temperature in the first phase upon stimulation with clomiphene also occurs with individual sensitivity to the drug.
Low or high temperature in both phases, provided that the temperature difference is at least 0.4 degrees, is not a pathology. This is an individual feature of the body. The measurement method can also affect the temperature values. Typically, with an oral measurement, the basal temperature is 0.2 degrees lower than with a rectal or vaginal measurement.
If you strictly follow the rules for measuring temperature and observe the problems described on your basal temperature chart in at least 2 cycles in a row, consult a doctor for additional examinations. Beware of your gynecologist making diagnoses based solely on charts. What you need to pay attention to:
anovulatory schedules
regular cycle delays when pregnancy does not occur
late ovulation and failure to become pregnant for several cycles
controversial charts with unclear ovulation
graphs with high temperature throughout the cycle
graphs with low temperature throughout the cycle
schedules with a short (less than 10 days) second phase
graphs with a high temperature in the second phase of the cycle for more than 18 days, without the onset of menstruation and a negative pregnancy test
unexplained bleeding or heavy discharge mid-cycle
heavy menstruation lasting more than 5 days
graphs with a temperature difference in the first and second phases of less than 0.4 degrees
cycles shorter than 21 days or longer than 35 days
charts with clearly defined ovulation, regular intercourse during ovulation and no pregnancy occurring for several cycles
The average value of the second phase of the cycle (after the temperature rise) exceeds the average value of the first phase by less than 0.4°C.
In the second phase of the cycle, there are temperature drops (the temperature drops below 37°C).
The rise in temperature in the middle of the cycle continues for more than 3 to 4 days.
The second phase is short (less than 8 days).
The method of determining pregnancy by basal temperature works provided there is ovulation in the cycle, since with some health problems the basal temperature can be elevated for an arbitrarily long time, and menstruation may be absent. A striking example of such a disorder is hyperprolactinemia, caused by increased production of the hormone prolactin by the pituitary gland. Prolactin is responsible for maintaining pregnancy and lactation and is normally elevated only during pregnancy and lactation (see Examples of graphs for normal conditions and various disorders).
Fluctuations in basal temperature in different phases of the menstrual cycle are due to different levels of hormones responsible for phases 1 and 2.
During menstruation, basal temperature is always elevated (about 37.0 and above). In the first phase of the cycle (follicular) before ovulation, the basal temperature is low, up to 37.0 degrees.
Before ovulation, the basal temperature decreases, and immediately after ovulation it increases by 0.4 - 0.5 degrees and remains elevated until the next menstruation.
In women with different lengths of the menstrual cycle, the duration of the follicular phase is different, and the length of the luteal (second) phase of the cycle is approximately the same and does not exceed 12-14 days. Thus, if the basal temperature after the jump (which indicates ovulation) remains elevated for more than 14 days, this clearly indicates pregnancy.
This method of determining pregnancy works provided there is ovulation in the cycle, since with some health problems the basal temperature can be elevated for an arbitrarily long time, and menstruation may be absent. A striking example of such a disorder is hyperprolactinemia, caused by increased production of the hormone prolactin by the pituitary gland. Prolactin is responsible for maintaining pregnancy and lactation and is normally elevated only during pregnancy and lactation.
If a woman is pregnant, then menstruation will not occur and the temperature will remain elevated throughout pregnancy. A decrease in basal temperature during pregnancy may indicate a lack of hormones that maintain pregnancy and the threat of its termination.
When pregnancy occurs, in most cases, implantation occurs 7-10 days after ovulation - the introduction of a fertilized egg into the endometrium (the inner lining of the uterus). In rare cases, early (before 7 days) or late (after 10 days) implantation is observed. Unfortunately, it is impossible to reliably determine the presence or absence of implantation either on the basis of a chart or with the help of ultrasound at an appointment with a gynecologist. However, there are several signs that may indicate implantation has taken place. All these signs can be detected 7-10 days after ovulation:
It is possible that small discharge appears these days, which disappears within 1-2 days. This may be so-called implantation bleeding. When the egg implants into the inner lining of the uterus, the endometrium is damaged, which leads to minor discharge. But if you experience regular discharge in the middle of the cycle, and pregnancy does not occur, then you should contact a gynecology center.
A sharp decrease in temperature to the midline level for one day in the second phase, the so-called implantation retraction. This is one of the signs most often observed in charts with confirmed pregnancy. This retraction can occur for two reasons. Firstly, the production of the hormone progesterone, which is responsible for raising the temperature, begins to decrease from the middle of the second phase; with pregnancy, its production resumes again, which leads to temperature fluctuations. Secondly, during pregnancy, the hormone estrogen is released, which in turn lowers the temperature. The combination of these two hormonal shifts leads to the appearance of implantation retraction on the graph.
Your chart has become three-phase, which means that you see a rise in temperature on the chart, similar to ovulation, during the second phase of the cycle. This rise is again due to the increased production of the hormone progesterone after implantation.
The example graph shows implantation retraction on the 21st day of the cycle and the presence of the third phase, starting from the 26th day of the cycle.
Early signs of pregnancy such as nausea, tightness in the chest, frequent urination, intestinal upset or just the feeling of pregnancy also do not provide an accurate answer. You may not be pregnant if you have all of these signs, or you may be pregnant without any symptoms.
All these signs can be a confirmation of pregnancy, but you should not rely on them, since there are many examples in which the signs were present, but pregnancy did not occur. Or, conversely, when pregnancy occurred there were no signs. The most reliable conclusions can be drawn if there is a clear rise in temperature on your chart, you had sexual intercourse 1-2 days before or during ovulation, and your temperature remains high 14 days after ovulation. In this case, the time has come to take a pregnancy test, which will finally confirm your expectations.
Measuring basal temperature is one of the main methods of tracking fertility, recognized by the World Health Organization (WHO). You can read more about this in the WHO document “Medical eligibility criteria for the use of contraceptive methods” page 117.
When you use the basal temperature method to protect against unwanted pregnancy, you need to take into account that not only the days of ovulation according to the basal temperature schedule can be dangerous. Therefore, during the period from the beginning of menstruation until the evening of the 3rd day after the rise in basal temperature, which occurs after ovulation, it is better to use additional measures to prevent unwanted pregnancy.
Our regular reader, Natalya Gorshkova, has compiled a form for you to quickly fill out and automatically plot your basal temperature chart, which you can print out and show to your doctor. You can download it from the link: schedule form.
The charts are discussed on the forum
Attention! Making any diagnoses based solely on basal temperature charts is impossible. Diagnoses are made based on additional examinations performed by a gynecologist.
Measuring basal temperature (BT) is necessary so that the doctor can determine whether a woman is ovulating, since during ovulation the temperature in the vagina and rectum drops, sometimes even to 36.2-35.9 ° C. And after 2-3 days it should rise to a level of 37°C or slightly higher. After such a jump in temperature, the second phase of the menstrual cycle begins. Measuring basal temperature reflects the functioning of the ovaries much more accurately than hormonal tests and ultrasound folliculometry.
The construction of the schedule should begin from the first day of the menstrual cycle, that is, from the first day of menstruation. The temperature changes in the rectum in the morning, on an empty stomach, immediately after waking up. That is, at 7-8 o’clock in the morning, without getting out of bed, use a simple mercury thermometer, inserting its mercury tip into the anus for 5 minutes. Don't forget to record the current date on the chart. Continue building the graph until the next menstruation begins. With the beginning of a new menstruation (new cycle), start building a new schedule. To catch a pattern, it is necessary to measure the temperature throughout three menstrual cycles and record the data obtained daily.
A woman must register every sexual intercourse and all events accompanying ovulation. It is very important to take into account the psycho-physical state of a woman. Poor or inadequate sleep, stress, nervous tension, overwork during the work week, illness - all this affects the menstrual cycle. Therefore, it is advisable to mark these factors on the chart with special icons.
Some women, for example, at the moment the egg is released from the ovary, feel a short pain (sharp prick) in the area of the right or left ovary. In some cases, a few drops of blood or copious mucus may be discharged from the vagina. Observing these phenomena during a rise in temperature helps the doctor in determining the fact of ovulation.
Basal temperature charts:
rice. A- during normal ovulation.
rice. B- in the absence of ovulation.
rice. IN- during ovulation with subsequent conception and pregnancy.
Three months later, the woman brings a sheet with temperature data. If there is no dysfunction of the ovaries (or other endocrine glands), and ovulation occurs normally, then further examination is carried out. If there is no ovulation, it is necessary to find and eliminate the cause of this deviation.
To create basal temperature charts yourself, you can download a file from me with a form to fill out with your daily temperature readings. All you have to do is print it out and start filling it out. On the first line you specify the current date of the month. And in the temperature grid of the form, draw your graph of basal temperatures.
Previously, it was believed that it was possible to determine a possible pregnancy, ovulation or gynecological disease only after passing a huge number of tests.
Today, such a myth will help dispel a simple basal temperature chart that any woman can independently draw up. He will not give an exact answer, like a doctor, but he will show him and you what is happening to the female body. This article will provide graphs of basal temperature with examples and explanations, as well as why basal temperature is needed and what it means.
In addition, measuring BT helps increase the chances of successful conception and the ability to plan the gender of the child. A template or sample basal temperature chart can be downloaded online.
Many women do not take basal temperature measurement seriously, believing that it is a mere formality that is of no benefit. However, this is far from the case. Thanks to the BT readings, the doctor can determine the following points:
It is necessary to measure BT over 3 cycles, this will provide more accurate information about the date of favorable conception. An experienced gynecologist will help you decipher the graph readings. You can also see an example of basal temperature graphs on the Internet online.
For the measurement, one type of thermometer is used; it is not changed during the measurement. Thus, it will be possible to see the norm or deviations on the basal temperature graph.
A mercury thermometer measures the temperature within 4-5 minutes, and an electronic one 2 times faster. Do not forget to wipe the device with an antiseptic before and after each measurement and let it dry before use.
Accurate and effective plotting requires compliance with certain rules:
The table for determining BT should include the following items:
A detailed description of these factors will help the doctor most accurately determine the time of conception. If desired, a basal temperature chart can be downloaded from any medical website related to gynecology.
Note that BT changes depending on the cycle, or rather its time.
So, during the first phase of the cycle, when only the maturation of the egg occurs, BT is low, gradually dropping to a minimum, then it rises again. The difference between the highest and lowest BT is from 04 to 0.8 degrees.
If measured at the time of menstruation, the temperature will be exactly 37 degrees, and after ovulation ends it rises to 37.1-37.1 under the influence of progesterone.
If the graph showed that BT in the first phase is much higher than in the second, then there is a clear lack of estrogen. You may need to take hormonal medications. In the case when the second phase is characterized by a low temperature in relation to the first, then we are talking about low progesterone.
When both cycles are persistent, this indicates ovulation has occurred. If in the second phase there is no increase in BT, then most likely there was no ovulation, i.e. the egg did not come out.
The BT chart is a fairly convenient and modern way to determine ovulation, which is an integral part of planning a successful pregnancy. The results of basal temperature will also be useful before going to the gynecologist.
When the graph is constructed correctly and the woman followed all the recommendations in its preparation, it allows not only to determine the presence of ovulation, but also possible pathologies of the genital area.
On the graph you can see an overlapping line that is drawn on top of six temperature values, precisely in the first phase. This is what a normal basal temperature graph looks like, without pathologies or deviations. We do not take into account only those days where the result could be distorted under the influence of taking medications, viral diseases, sexual contact the day before, etc.
To determine ovulation, you need to use standard rules:
pay attention to the midline and 3 BT results, the difference in two out of three cases should be at least 0.1 degrees. If these are the results in the table, then after 1-2 days you will be able to observe a clear ovulation line.
As we found out, the BT graph is divided into two phases, we can see this in the photo above, where the vertical line is located. The normal cycle in the second phase is from 12 to 17 days, but most often 15.
As practice shows, quite often there is a deficiency in phase 2. If you note that this phase is 8-10 days shorter, then this is a serious reason to consult a doctor.
If we talk about the BT norm, then its difference between the first and second phases is about 0.4-0.5 degrees, but no more.
Two-phase cycle and its norm (normal two-phase schedule)
On this graph, it is necessary to note an increase in BT by no more than 0.4 degrees.
If you look at the example graph above, you can see that 2 days before ovulation BT decreases.
With this deficiency, you will notice a significantly weak rise in BT, and the difference in the first and second phases will be no more than 0.2 degrees. When a similar phenomenon is observed for more than three cycles in a row, then we can talk about serious hormonal imbalances. As for pregnancy itself, it can occur, but at the same time there is a high risk of miscarriage.
Also, do not forget about anovulatory cycles. This can happen in a woman’s life up to three times a year. However, if the number of such cycles exceeds 3-4, then this is a serious reason to consult a doctor.
In the graph below you can clearly see the absence of ovulation:
If at the end of the graph, a woman observes large differences in BT, and the line itself is in a chaotic state, then we can talk about a lack of estrogen.
A deficiency of this hormone can also be noticed by an increase in temperature in the second phase to 37.2, sometimes to 37.3.
Note that the increase in temperature is very slow and can last up to 5 days. In this case, it cannot be said that this basal temperature will be perceived by the doctor as normal.
Below in the graph you can see how estrogen deficiency manifests itself.
